Catalog Description
of the BoilerTEK™ boiler management system
Burner Management System Fuel
- NG-Select for natural gas fired boiler
- 2F-Select for number two(2) oil fired boiler
- 4F-Select for number four(4) oil fired boiler
- 6F-Select for number six(6) oil fired boiler
Burners
- 1B, 2B, etc.-Select for number of burners per boiler
Scanners
- 1S or 2S-Select the number of scanners required
Options
- DS-Select if digital scanner with 4-20ma output is desired (Displays on analog meter)
- SS-Select if a monitored surge suppressor is desired (Failure displays on screen)
Combustion Control System
- PM-Select if you require a controller to provide a demand signal to one or more boilers based on plant header pressure
- BM-Select if a signal is already being provided by an existing plant master
- JS-Select if air and fuel are operated through common linkage from a single actuator
- PL-Select if fuel and F.D. actuators operate independently from a common signal
- CL-Select if fuel flow and air flow are metered
- TM-Select if Oxygen Trim is desired
- VM-Select if Oxygen Trim will be implemented through a variable speed drive to the fan motor
- L1-Select if one element is desired (requires drum level measurement)
- L2-Select if two element is desired (requires drum level and steam flow measurement)
- L3-Select if three element drum level is required (requires above metering plus feed flow)
- ID-Select if boiler is negative draft type (requires draft transmitter)
Optional Control Systems
- LL-Select if automatic boiler sequencing based on load requirements is desired
- AI-Select if additional analog inputs are desired
- IF-Select if an interface to an existing HVAC or other system is required
- RM-Select if remote pager or cell phone text messaging for alarms is required
- DA-Select if a Data Acquisition System is required